Attwood Aluminum Uživatelský manuál stáhnout pdf

Attachment:

On the top plate, rotate the handle counter clockwise until it stops. Set

top bracket over bottom bracket. Slide top bracket away from bow

until it stops (about 1/4 inch). Turn handle clockwise until tight.

Detachment:

Rotate handle counterclockwise until

it stops. Slide top bracket towards bow

(about 1/4 inch). Lift and remove motor

from boat.

Aluminum

Quick Release Bracket

www.motorguide.com

69532 RevB

Instruction Sheet

Kit Contents

1 - Top plate

1 - Bottom plate

1 - Hardware package

6 M6 x 70 mm socket cap bolt (A)

4 M6 x 30 mm socket cap bolt (B)

2 M6 x 22 mm socket cap bolt (C)

6 6.4 mm stainless steel washers-large (D)

12 6.4 mm stainless steel washers-small (E)

12 6.4 mm nylon washer (F)

12 6.4 mm nylock nuts (G)

Required Tools for Installation:

• 6 mm (1/4 in) wrench

• drill

• 6 mm (1/4 inch) bit

• 10 mm socket and ratchet

• 10 mm wrench

Instructions:

The Quick Release Bracket consists of a top and bottom plate. Separate

top and bottom plate to mount. Determine location for mounting.

Top Plate:

Use the four 30 mm (B) bolts and attach the top plate onto the bottom

of trolling motor. Use one small washer and a nylock nut per bolt then

tighten firmly. The 22 mm (C) bolts are used in a specific location and

insert from the top, see diagram below. Secure with small washer and

nylock nut.

#8M0092064

Bottom Plate:

Using the bottom plate as a template, mark and pre-drill 6 mm holes

in desired location. Using the 70 mm bolts, attach bottom plate to the

boat. Insert bolts with a small washer from the top. Add 1 or 2 nylon

washers above the boat deck and a large steel washer under the boat

deck followed by the nylock nut. Tighten firmly.

boat deck

Bottom plate

Bow

trolling motor

handle

shackle

Top plate

Bow

Loosen

Tighten

For security, seat handle over shackle

and insert padlock (not included) to

prevent removal of top bracket.

1 2

Shrnutí obsahu

Strany 1 - Quick Release Bracket

Attachment:On the top plate, rotate the handle counter clockwise until it stops. Set top bracket over bottom bracket. Slide top bracket away from bow

Strany 2 - Support à Dégagement Rapide

pont de bateauEAFDGplaque de fondprouePour plus de sécurité, poignée siège sur manille et insérez un cadenas (non fourni) pour empêcher le retrait du

Komentáře k této Příručce

Žádné komentáře

Attwood Aluminum Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Vodní zařízení Attwood Aluminum. Attwood Aluminum Manuel d'utilisation Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Vodní zařízení Attwood Aluminum